Air and Fuel Monitoring

Fast Air/Fuel meter kit for NGE systems

• Kit works with AutoDyn, CycleDyn, and XConsole systems equipped with 2 analog inputs or via AMP connector
• Kit includes 1 Wideband Lambda sensor, cable, and drive box
• Order 1200A-FAST02-L For Lemo Connector
• Order 1200A-EXT-A for AMP Connector
• Order 1200A-EXT-AMP connector extension cable
• Can use with weld-in bungs or our tail pipe probe
• Includes 12V 5amp power supply

Part No.: 1200A-LM1

Complete Air/Fuel Meter Kit for NGE Systems

• Kit works with AutoDyn, CycleDyn, RaceDyn, and XConsole systems equipped with our optional analog voltage input panel
• Kit includes AFM-1000 A/F meter, interface cable with brown LEMO connector, and installation instructions
• Interconnect panel can be modified on some NGE systems for an additional cost

Part No.: 1200A-NGE1000

Economical 5A, 12V Single-channel Power Supply

• Includes 5A, 12V power supply for use with Fast Air/Fuel
• meter kit or AFM 1000 Lambda kits
• Includes 120VAC power cord

Part No.: 4000P-16146

Tail Pipe Probe

• Measure air/fuel data directly from the tail pipe
• Perfect for when you cannot install a weld fitting directly in the exhaust pipe
• Kit includes sensor housing and Venturi vacuum pump
• Standard probe is 12 inches long (30.5 cm); extension probe is 18 inches long (45.72 cm)
• Requires regulated shop air 30 psi max
• Works with AFM1000 Lambda kits or Fast Air/Fuel meter kit

Part No.: 1200A-EXH01

Weld-in Oxygen Sensor Bung

• Measure air/fuel data directly from the exhaust stream
• Weld fitting directly in the exhaust pipe for more accurate results
• Standard 18 mm x 1.25 pitch bung

Part No.: 1400P-0063

Replacement UEGO Oxygen Sensor (AFM-1000)

• Direct replacement O2 sensor for AFM-1000 Lambda kits
• Kit includes sensor housing and one pre-installed crush washer
• Standard 18 mm x 1.25 threads

Part No.: 4000P-1000A-2

Replacement UEGO Oxygen Sensor (AFM-2000 & LM1)

• Direct replacement O2 sensor for AFM-2000 Lambda kits and Fast Air/Fuel meter kits
• meter kits
• Kit includes sensor housing and one pre-installed crush washer
• Standard 18 mm x 1.25 threads

Part No.: 4000P-2010

Complete Dual

Channel Air/Fuel Monitoring Kit Includes:

• (2) Channel Module w/Sensors Includes
• 12V 5amp power supply 10’ Extension Cables
• Weld Nuts and Bungs Kit works with AutoDyn, CycleDyn, Data Acquisition Upgrades (Including DTS) and XConsole systems equipped AMP connector

• Part No.: 4000P-WEGO3D-SF
• Price: $585.00

Complete Dual

• (2) Channel Module w/Sensors
• Includes 12V 5amp power supply
• 10’ Extension Cables
• Weld Nuts and Bungs Kit works with legacy DTS DOS based Data Acquisition

• Part No.: 4000P-WEGO3D-DTS
• Price: $585.00

8 Channel

• (4) Dual Channel Modules w/Sensors
• (8) 10’ Extension Cables
• Weld Nuts and Bungs
• Power Supply Sold Separately, PN 4000P-PR60 $550.00
• Also requires an Analog Expansion Panel PN -1200a-2307 $1,595.00 And Cable Adaptation Kit PN-1200a-2462-KIT $850.00

• Part No.: 4000P-WEGO3D-8
• Price: $1,995.00

WEGO III